| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics, Industrial, Medical |
| Standard: | GB, ASTM, AISI |
|
Still deciding? Get samples of US$ 30/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Code No. | Chemical Composition % | Mechanical properties | ||||||
| CU | Impurity | W | Density (g/cm3 ) |
Hardness HB |
RES (cm) |
Conductivity IACS/ % |
TRS/ Mpa |
|
| CuW50 | 50+/-2.0 | 0.5 | Balance | 11.85 | 115 | 3.2 | 54 | |
| CuW55 | 45+/-2.0 | 0.5 | Balance | 12.30 | 125 | 3.5 | 49 | |
| CuW60 | 40+/-2.0 | 0.5 | Balance | 12.75 | 140 | 3.7 | 47 | |
| CuW55 | 35+/-2.0 | 0.5 | Balance | 13.30 | 155 | 3.9 | 44 | |
| CuW70 | 30+/-2.0 | 0.5 | Balance | 13.80 | 175 | 4.1 | 42 | 790 |
| CuW75 | 25+/-2.0 | 0.5 | Balance | 14.50 | 195 | 4.5 | 38 | 885 |
| CuW80 | 20+/-2.0 | 0.5 | Balance | 15.15 | 220 | 5.0 | 34 | 980 |
| CuW85 | 15+/-2.0 | 0.5 | Balance | 15.90 | 240 | 5.7 | 30 | 1080 |
| CuW90 | 10+/-2.0 | 0.5 | Balance | 16.75 | 260 | 6.5 | 27 | 1160 |
WCu alloys are used where the combination of high heat resistance, high electrical and/or thermal conductivity, and low thermal expansion are needed. Some of the applications are in electric resistance welding, as electrical contacts, and as heat sinks. As contact material the alloy is resistant to erosion by electric arc. WCu alloys are also used in electrodes for electrical discharge machining and electrochemical machining.
The CuW75 alloy, with 75% of tungsten, is widely used in chip carriers, substrates, flanges and frames for power semiconductor devices. The high thermal conductivity of copper together with the low thermal expansion of tungsten allows thermal expansion matching to silicorn, gallium arsenide, and some ceramics. Other materials for this applications are CuMo alloy, AlSiC, and Dymalloy.
Alloy with 70-90% of tungsten is used in liners of some specialty shaped charges. The penetration is enhanced by factor 1.3 against copper for homogeneous steel target, as both the density and the break-up time are increased. Tungsten powder based shaped charge liners are especially suitable for oil well completion. Other ductile metals can be used as binder in place of copper as well. Graphite can be added as lubricant to the powder.
Tungsten heavy alloy| Tungsten heavy alloy | W-Ni-Fe | W-Ni-Cu | |||||
| Designation | 90W | 92.5W | 95W | 97W | 90Cu | 92.5Cu | 97Cu |
| Density (g/cm3) | 17.0 | 17.6 | 18.0 | 18.5 | 17.0 | 18.0 | 18.5 |
| Tensile Strength (MPa) | 820 | 780 | 820 | 840 | 750 | 650 | 550 |
| Elongation (%) | 10 | 7.0 | 7.0 | 5.0 | 1.2 | 1.0 | 0.5 |
| Hardness (HRC) | 25 | 26 | 27 | 28 | 24 | 27 | 28 |
| Young's Modulus (GPa) | 310 | 320 | 340 | 365 | 270 | 300 | 320 |
| Thermal expansion coefficients (10-6/K) | 4.61 | 4.62 | 4.60 | 4.50 | 5.60 | 4.40 | 4.00 |
| Electrical conductivity (%) | 10 | 13 | 13 | 17 | 17 | 19 | 23 |
| Thermal conductivity (W/m.K) | 80 | 90 | 93 | 95 | 110 | 120 | 125 |
| Molybdenum Products |
Molybdenum rods/ Molybdenum plate /Molybdenum sheet |
| Molybdenum wire/ Spray Moly wire/ Moly wire for EDM | |
| Molybdenum electrode/moly disk | |
| Molybdenum boat/ Molybdenum Crucible/Moly tube | |
| Tungsten Products |
Tungsten rods/ Tungsten plate/ Tungsten sheet |
| Tungsten wire/ Tungsten electrode | |
| Tungsten crucible /Tungsten boat/ Tungsten tube | |
| Other specail shape | |
| Alloy Products |
TZM Products/MoLa products |
| WNiFe / WniCu Product/ Alloy ball/WC-Co | |
| MoCu/Wcu rods or sheet |
){kind=link}